Metalworking Machinery and CNC
2791

Type

Online Auction

Auction Dates

Oct 02 - Oct 23, 2012

4

Cincinnati Milicron Sabre 750 CNC Vertical Machining Center Serial Number 7029 A01 95 1099, New 1995 Control: Acramatic 850SX CNC X Axis Travel: 30" Y Axis Travel: 20" Z Axis Travel: 20" Table Size: 34" x 17" Max Table Load: 1,000 LBS Cat40 Spindle, 8,000 RPM 21 Position Automatic Tool Changer 15-HP 460/3/60 Motor & Controls Machine Dimensions: 110"L x 103"W x 106"H Machine Weight: 8,800 LBS Includes: ICS Spindle Chiller, TONS of Manuals, High Intensity Interior Light, Pendant Hand Control RS232 Port NOTE: This machine was not in service at the time it was removed.  Please bid accordingly.  We strongly recommend a personal inspection to ensure machine will meet expectations.

 Details

1

Bridgeport Series I Vertical Milling Machine Serial Number BR271181 NEW 1994 9"x 48" Scrapped T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Knee Adjustment, 5" Quill Travel, Variable Spindle Speeds: 60 to 4,200 RPM, R8 Spindle 2HP Continious, (3HP 30-Minute Interval) 208/220/440 Volt 3-Phase Motor and Controls, Approx 60"x60"x84" and 2200 lbs Includes: Anilam Wizard 900 2-Axis Digital Readout, Bridgeport Model 8F Longitudinal Powerfeed Bijur One-Shot Lube, Chromed Ways, Aloris Keyless Chuck on R8 Collet Collet Rack, Holddown Rack

 Details

2

DoAll Model D1030-12 Surface Grinder Serial Number 229-70168 Hydraulic Feeds 10" x 30" Rated Capacity 34" Longitudinal Travel of Table 12" Cross Travel of Table 15" Vertical Adjustment of Wheel Head 10" Maximum Under Spindle Variable Longitudinal Feed: 5 TO 50 fpm Variable Cross Feeds: .005 to .187 12" x 1" x 3" Maximum Wheel Size Equipped: 10 1/2" x 30" Magnalock Fineline Electromagnetic Chuck w/DoAll Selectron Electromagnetic Rectifier Power Elevation Bijur Automatic Lubrication Coolant Pump & Tank 1/4 HP Elevation Motor 1 HP Continental Hydraulics Polypac Hydraulic Unit 5 HP Super Precision DoAll HS-3 Direct Drive Spindle Weight : 5200 LBS 220/440 60Hz 3-Phase Motor & Controls Dimensions : 83"L-R x 57" F-B x 78" H

 Details

3

Monarch "Merit" Engine Lathe Serial Number 47788 15" x 42" Capacity 16" Swing Over Bed, 1-3/4" Hole Thru Spindle Infinitely Variable Speeds 30-1800 Standard Threading 208-230/460 3-Phase New(er) Baldor 3-HP Motor Approx Dimensions 36" x 96" x 55 Weight 3,000 lbs Includes: Taper Attachment, Royal 3MT Live Center, Enco 4-Position Tool Post Steady Rest, Tail Stock, Manual 3-Jaw Chuck, 4-Jaw Chuck, Face Plate, Dog Plate Chip Pan, Work Light, 2J Collet Rack Note: This machine has new(er) digital motor controls. Acer Model Dynamic 1780G Removable Gap Engine Lathe. 17"x80" Rated Capacity, 17"/24" Swing Over Bed/Gap, 10" Swing Over Cross Slide, 80" Between Centers, 2 1/4" Hole Thru Spindle, (12) Spindle Speeds: 50 to 1800 RPM, Standard and Metric Threading, 9" Gap Length, Sony 2-Axis DRO, 9 3/4" 3-Jaw Chuck, 4-Way Tool Post, Steady rEst, Follow Rest, (3) Face Plates, Adjustable Tailstock, Foot Brake, 7 1/2HP 230 Volt 3-Phase Motor and Controls, s/n:l 97111222. Approx 128"x44"x60" and 6,000 lbs.

 Details

A

All bidding for this auction takes place on Hansen & Young website. CLICK HERE TO BID NOW!

 Details

5

Kira Model KV-5MC CNC Vertical Machining Center Serial Number 56091, Control: Fanuc 6M X Axis Travel: 25" Y Axis Travel: 16" Z Axis Travel: 20" Table Size: 38" x 18" Drilled & Tapped Layout Table Max Table Load: 1,000 LBS 40 Taper Spindle, 6,000 RPM 18 Position Automatic Tool Changer 7.5-HP 460/3/60 Motor & Controls Machine Dimensions: 82" x 82" x 110" Machine Weight: 9,800 LBS Includes: RS232 Port, Fixture Plate, Fanuc Tape Mate Reader, Coolant Pan & Motor

 Details

6

Cincinnati Milacron 208U CNC Turning Center Serial Number 5550U08-86-071 Controls: Acramatic 850 Spindle RPM: 20-3600 Max. Swing: 20.86" Max. Machining Dia: 11.8" Max Machining Length: 21.6" X Axis Travel: 6.8" Z Axis Travel: 23.6" Programmable Hydraulic Tail Stock Turret: 12 Station (6) OD, (6) ID 15HP 460 Motor & Controls approx 7,000 Lbs Dimensions: 86" x 127" x 73" high Includes: Jorgenson Chip Conveyor, Tool Presetting Arm, 3-Jaw Power Chuck Foot Switch, RS232 Data Port, Tons of Manuals

 Details

7

Cincinnati Milacron Acramatic 850 CNC Controller Part No. 3-424-2020A

 Details

8

Richmill CNC30 Digital Control Panel Auto, Manual, POS, EDT 10-pin, 3-pin, 7-pin Connectors

 Details

9

Heald Internal Spindle For Cylindrical Grinder Machine Type 9-2 Unit No. 45264 Serial No. 84732 Max Speed 11,000 RPM Approximate 1-5/8" Diameter x 5-1/2" Shaft 2-3/4" Wheel Overall Length Approximate 20"

 Details

10

Harrington 250Lb Electric Chain Hoist Code No. ED250DA Lifting Speeds: 26Ft/Min Max, 10Ft/Min Creep Pendant Control (as Shown) 120V, 60Hz, Single Phase

 Details

11

Metal Tank Skimmer Static Lift 12" Disk 2-Charge Pads Screw Mount Dichrage Trough 120V

 Details

12

(6) Lightly Used 10" Grinding Wheels 3" Arbor Hole to Include: (2) Norton 32A, 10x3/4x3 (1) Norton 38A60-IVBE, 10x1x3 (1) Radiac WAA120J8V8, 10x3/4x3 (1) Radiac WRA80J8V8, 10x3/4x3 (1) Universal EN12413, 10x3/4x3

 Details

13

Siemens Simdrive Motion Controller Part No. 6SC65064AA01 6-Digit Readout Approximate 26-1/2" x 17-1/2" x 12-1/2"

 Details

14

Granite Surface Plate Approximate 12" x 18" x 3"

 Details

15

Blake Mfg CO-AX Indicator .0005 Axis Offset Includes curved and strait Points.

 Details

16

(3) Mitutoyo Indicators to Include: (1) No. 1507, .0005"-.125" (1) No. 1411N, .001"-.250" (1) No. 1507N, .0005"-.125"

 Details

17

(2) Federal Indicators to Include: (1) No. C21, .0001", Full Jeweled (1) No. B81, .001", Full Jeweled

 Details

18

(2) CDI Chicago Indicators No. J1-C100-250 .250 Range Full Jeweled

 Details

19

(2) Standard Indicators No. D1-20111-A .001" Shock Proof Flat Anvil

 Details

20

Vermont Gage Partial Pin Gage Set Part No. 901200300 .0110" - .2500"

 Details

21

Huot Drill Blanks As Shown

 Details

22

Mitutoyo Digital Calipers to Include: (1) Digimatic 6" Digital Caliper Model No. CD-6"B Code No. 0066386 Serial No. 500-133 (1) Digimatic 6" Ruler Only

 Details

23

(3) Fowler 6" Digital Calipers Model Ultra-Cal II

 Details

24

(3) Assorted NSK Micrometers to Include: (1) 0" - 1", .0001" (1) 1" - 2", .0001" (1) 2" - 3", .0001"

 Details

25

(3) Assorted NSK Micrometers to Include: (1) 0" - 1", .0001" (1) 1" - 2", .0001" (1) 2" - 3", .0001"

 Details

26

(20 Assorted Mitutoyo Micrometers to Include: (1) No. 103-262, 1" - 2", .0001" (1) No. 101-119, 2" - 3", .0001"

 Details

27

(4) Assorted Starrett Micrometers to Include: (1) No. 230, 0" - 1" (1) No. 436, 1" - 2" (1) No. 436, 2" - 3" (1) No. 436, 3" - 4"

 Details

28

Palmgren 2-1/2" Jewelers Vise

 Details

29

Assorted Lathe Tooling to Include: Lathe Dogs, Tool Post and Armstrong T2-R Cutter

 Details

30

(6) Cle-Forge MT#3 Drills,

 Details

31

(10) Reamers, 1/2" Shank

 Details

32

(4) Kennametal Removable Insert Type Tool Holders No. NSR-203D Insert N-3-R, 1-1/4" Shank

 Details

33

(5) Assorted Kennametal Removable Insert Type Tool Holders To include: (1) NGDHR-24, 1-1/2" Shank (4) NGDHR-20, 1-1/4" Shank (3) Tip SB4187R (1) Tip SB4250R (1) Tip SB4125R

 Details

34

(5) Assorted Valenite Removable Insert Type Tool Holders, 1" Shank to Include: (2) PRGOR-16-32.5 CD, RC-32.5 (1) PTMR-16-43 D, TN 43N (1) MWLNR-16-4C, WN-43, NL-46 (1) SD-TMR-16, Loc-A-Dex

 Details

35

(3) Assorted Kennametal Removable Insert Type Tool Holders to Include: (1) SCLCRF-083D, NHZ, 1/2" Shank (1) NSL-062, NJ6, 3/8" Shank (1) NSR-62, INS N2R, 3/8" Shank

 Details

36

(5) Assorted Removable Insert Type Tool Holders, 1" Shank to Include: (1) Chester 204-110 (1) Kennametal NSR-163C, INS N3R (1) Valenite VTHR-3-1 (1) CCLAR-16-4

 Details

37

(4) Assorted Removable Insert Type Tool Holders, 1" Shank to Include: (1) Carbology TBTL-16, 1/2IC (1) Carbology RAR-16-6 (2) CCLFR-16-4

 Details

38

(6) Assorted Removable Insert Type Tool Holders and Cutters to Include: (1) Kennametal CTCPR-244D, NB9 (1) Valenite VTBN-16-32, V-Cut Plus (Holder) (1) Valenite VH306-100R-5, V-Cut Plus (1) Valenite VG101-25-40 (1) GRC-R-64B (1) Kennametal

 Details

39

TSD Microbore Adjustable Boring Head Model SS10-ADA 1" Shank

 Details

40

TSD Microbore Adjustable Boring Head Model SS10-ADA 1" Shank

 Details

41

(2) Assorted DA-10 Collet Tool Holders 1" Shank

 Details

42

(5) Assorted Milling Tools To Include: (1) Putnam 1-1/2" Cobalt Roughing End Mills (1) Hanita 1-1/2", 1-1/4", 6 Q/F Roughing End Mill (1) SECO, EDP04470-02424483 Chamfering, Removable Insert Type (1) CJ, 267-41311, 5/16-12, Setting, Removable Insert Type (1) SECO, D-112540, Chamfering, Removable Insert Type

 Details

43

(2) V-Blocks 4" x 4" x 4" and (1) Clamp

 Details

44

(5) Parlec Model C40-75SC3 Collet Chuck CAT-40, 75PG Collet

 Details

45

(3) Parlec Collet Chuck CAT-40 Tool Holders to Include: (2) C40-25ER262 25ER Collet (1) C40-25ER2, ER25 Collet

 Details

46

(3) CAT-40 Tool Holders NC Tool Model E-01-0020 DA20 Collet Chuck

 Details

47

(6) Command C4C4-1000, CAT-40 Tool Holders TG100 Collet

 Details

48

(6) Assorted CAT40 Tool Holders To Include: (1) GS CAT40 3/8-2.50, End Mill (1) ERI America CV40-EM0625-1.75, End Mill (1) Command C4E4-0750, End Mill (1) Lyndex Shell Mill With Sandvik Coromant RA-285.2-080 Shell Mill (1) Lyndex TG100 Collet Chuck (1) Lyndex PG100 Collet Chuck

 Details

49

(8) Assorted CAT-40 Tool Holders End Mill Type To Include: (1) Lyndex, C4006-0187, 3/16" (1) Lyndex, C4006-0250, 1/4" (1) Lyndex, C4006-0375, 3/8" (1) Lyndex, C4006-0500, 1/2" (1) Lyndex, C4006-0625, 5/8" (1) Lyndex, C4006-0750, 3/4" (1) Lyndex, C4006-0875, 7/8" (1) Lyndex, C4006-1000, 1" AND (1) Equipto 40T CAT-40 Tool Holder with 8-inserts

 Details

50

Moffatt Work Light Model No. 95074 Removable Pin Base Holder 120V

 Details

51

Moffatt Work Light Model No. 95074 Removable Pin Base Holder 120V

 Details

52

18" 4-Jaw Chuck with 5" Hole 3-Step Steel Jaws 11 5/8" 4 Bolt Back Plate (one jaw screw requires repair or replacement)

 Details

53

Transformer Single Phase General Purpose Transformer Power Rating 10 KVA Single Phase Enclosure Indoor/Outdoor Temperature Rise 115 Degrees Celsius 240/480 Volts Primary - 120/240 Volts Secondary Over $1,000 New

 Details

54

GE Transformer Cat No. 9T23B3874 75.0kVA, 60Hz, 3-Phase, 5.5%imp Rainproof 3R Enclosure Primary Voltage: 400 Secondary Voltage 200 & 120 Approximate Dimensions 24" x 32" x 36" Approximate Weight 505Lbs

 Details

55

Hytrol Conveyer Co. Steel Belted Conveyer Serial No. 455921 24" x 48" Steel Belt 6" Diameter Drive Gear Motor Reduction Gearbox Adjustable Leg included 1/2HP Motor 208-230V, 60Hz, 3-Phase Approximate Dimensions 36" x 48" x 30" Approximate Weight 300 Lbs.

 Details

56

Large Lot Of Assorted Steel Pipe Fittings To Include Approximate: (6) 2" Elbows f-f (15) 2" Extensions, 4" to 6" Lengths (8) 2" to 1-1/2" Reducers (5) 2-1/2" to 2" Reducers (8) 2" Elbows m-f (4) 2" Joints f-f (8) 1-1/2" Joints f-f (20) 1-1/2" Extensions, 4" to 6" Lengths (6) 1-1/2" Elbows f-f (10) 1-1/2" Elbows m-f

 Details

57

Nordson Vista Hot Melt Glue Machine Unit No. 3500V-1EAV4D Serial No. AN97F24290 Front Digital Control Panel 450 Degree Max (3) 12-Pin Connectors 90 PSI Max 200-240VAC, 50/60Hz, 1/3 Phase, 27A

 Details